In the example below, there is a device name containing “Serial” (/dev/tty.KeySerial1) and also one with the model number of the USB serial adapter being used (/dev/tty.USA19Hfd13P1.1).
#Royal tsx cisco console install
If you do not see an item as described above, your drivers may not have been installed correctly, so you will need to install your drivers again.You should see a device with “serial” or “Serial” in the name and possibly the model number of the USB serial adapter being used.Verify that your device is connected by typing the following: ls /dev/cu.*.Go to Applications > Utilities > Terminal.In the terminal emulator window, if you do not see a command line prompt for the router CLI (such as router# or router> or Username#), press Enter until it appears.Īccess router command line interface using Mac laptop.In the example below, COM3 is the port being used to connect to your router and laptop via the console cable. In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.Otherwise, follow the instructions for the program you are using to access your router’s command line interface to the serial port. If you are using PuTTY, follow the bulleted steps below.If you do not have a terminal emulator program installed, download and install one, such as PuTTY, to your laptop. Start the terminal emulator program on your laptop.Determine the serial port being used to connect your laptop to your router over the console cable.If your laptop has no serial port to connect to the serial end of the console cable, use a USB to serial DB-9 adapter to connect the serial end of the console cable to a USB port on the laptop. Connect your router to your laptop using the console cable.Access router command line interface using Mac laptopĪccess router command line interface using Windows laptop.Access router command line interface using Windows laptop.Follow the steps below to access your router’s command line interface (CLI) based on your operating system:
0 kommentar(er)
